Compressor e kopantsoeng ea Screw Air e nang le Tank le Air Dyer
LIEKETSENG LITLHAKISO
■ E potlakile ebile e bonolo, e tla le tanka ea polokelo ea khase, se omisang se batang, sefahla, ha ho hlokahale ho hokahanya liphaephe leha e le life ho u fa moea o hloekileng o hatelitsoeng;
■ Sistimi e bolokang sebaka le e kopanyang ea compressor;
■ Sebaka sa moea se tšoarellang, se sebetsang hantle le se tsitsitseng
■ Pholiso e kopantsoeng e kopanya ho pholile ha oli le ka mor'a ho pholile;
■ Moralo oa leholiotsoana oa ka hare le o kantle oa moqomo oa ho arola oli ho fokotsa oli ea moea;
■ Moralo oa ho arohana ha oli, tahlehelo ea khatello e tlase, bophelo bo bolelele, fokotsa litšenyehelo tsa tlhokomelo ea hau;
■ Enjene ea IE3, boloka litšenyehelo tsa motlakase oa hau;
■ IP54, Enjene ea ho nyoloha ha mocheso oa Sehlopha sa B e loketse maemo a thata joalo ka lerōle le lebe le mocheso o phahameng;
■ Lubrication e sa feleng ea li-bearings tse ka pele le tse ka morao tsa enjene;
■ Tšireletso ea ho koala mocheso o phahameng;
■ Tšireletso ea boima ba likoloi;
■ Sistimi ea ho theola khatello ea maikutlo ho feta tekano;
■ Ntlafatsa letlapa le monyang ho thothomela ho fokotsa ho thothomela le lerata;
■ Beha likarolo tsa motlakase le karohano ea oli le li-filtration modules tse senyehang habonolo ke mocheso o phahameng ka kamoreng e batang, e leng ho ntlafatsang bophelo ba tšebeletso ea unit.
Phello ea moea e tšoarellang, e sebetsang hantle le e tsitsitseng
1. Mohopolo oa moralo oa "rotor e kholo, e kholo ea ho beha, lebelo le tlaase" e amoheloa ho fokotsa lerata le ho thothomela le ho eketsa bophelo le botsitso ba moeti.
2. Leino la leino le sebelisoa ke Jeremane KAPP rotor grinder ho etsa rotor e nepahetseng e phahameng, e leng tiiso ea pele ea ts'ebetso e phahameng le botsitso ba moea oa ho qetela.
3. Amohela mofuta o mocha oa 5: 6 sebopeho sa meno a asymmetric rotor, mochine oa ho lekanya o nang le mekhoa e meraro e nepahetseng bakeng sa tekanyo e feletseng, eketsa matla a moea ka 5% -10%
4. Li-bearings tsohle tse tsoang linaheng tse ling li sebelisoa.
Enjene e khethehileng bakeng sa compressor ea moea
1. Torque e kholo ea ho qala
2. Enjene e khethehileng bakeng sa compressor ea moea, li-bearings tsa boleng bo tsoang kantle ho naha;
3. IE3 matla a phahameng a matla a motlakase, fokotsa litšenyehelo tsa hau tsa ho sebelisa
4. Moralo oa likoloi o entsoe ho latela 1.2 coefficient;
5. Sehlopha sa ts'ireletso sa IP54, sekhahla sa ho itšireletsa sa F.
6. Lubrication e sa feleng ea li-bearings tse ka pele le tse ka morao tsa motlakase ntle le ho eketsa mafura
Enjene e sa feleng ea makenete ea synchronous
1. IP65 boemo ba tshireletso, bo tsitsitseng le bo tshepehang ho feta IP23 dibakeng tse thata;
2. Moralo o pholileng ka oli, sebelisa oli e tlotsang ho pholisa enjene, mocheso o sebetsang oa mochini o tsitsitse haholoanyane, bophelo bo bolelele, ha ho na fan axial fan, kahoo ha ho na tahlehelo ea matla a matla a fan ea axial;
3. Moqapi oa coaxial o nang le rotor e kholo ea moea, ntle le ho kopanya, ho lahleheloa ke matla a matla a lebokose la gear;
4. Ho sebelisa 38UH lisebelisoa tsa tšepe tsa makenete, ho hanyetsa mocheso 180 ℃
6. Lubrication e sa feleng ea li-bearings tse ka pele le tse ka morao tsa motlakase ntle le ho eketsa mafura
Inverter ea vector e ikhethileng
1. Boiketlo ba setsebi, papali e phethahetseng le enjene;
2. Lekola ka botlalo litekanyetso tsa motlakase, ho kenyelletsa le mocheso oa motlakase, ho fokotsa kotsi ea mocheso o phahameng oa motlakase;
3. Moralo o ikemetseng oa likotopo tsa moea, maemo a matla a tikoloho;
4. Karabelo e potlakileng, nako ea karabelo e ka tlase ho 50mS
5. Torque e kholo ea maqhubu a tlase, e ka hlahisa torque e lekantsoeng ea 180%;
Fen ea ka hare ea rotor
1. IP44 pholileng fan, Class F insulation;
2. Ha ho bapisoa le fan ea ka ntle ea rotor, fan ea ka hare ea rotor e na le khatello e phahameng ea moea, molumo oa moea o mongata, le phello e ntle ea ho pholile;
3. Ka lebaka la khatello e matla ea moea, sepholisa le sefe li na le monyetla o fokolang oa ho thijoa
Lisefa tse tharo
Sefepi sa moea:sebaka sa filthara se feta 150% ea tlhokahalo e tloaelehileng, tahlehelo e tlase ea khatello ea inlet, le matla a phahameng a matla;
Setlhopha sa oli:Moralo oa filthara ea oli e tsoang kantle ho naha e nang le fiber ea khalase e atolositsoeng ea amoheloa. Bokhoni bo lekantsoeng ba sefahla sa oli ke ≥1.3 linako tsa bophahamo ba oli e potolohang. Ho nepahala ha sefa ho phahame mme ho tšoarella ho hotle.
Sekhetho sa oli:Konokono ea oli ea khalase e tsoang kantle, phello e ntle ea filtration, tahlehelo ea khatello ea mantlha ea oli e tlase.
Sephahla se kenang
Valve e kenang:teko ea lebelo la phallo e tlase, tahlehelo e tlase ea khatello, ho fokotsa tšebeliso ea matla;
Botlaaseng ba valve ea ho hlahloba khatello:tahlehelo ea khatello e tlase, taolo e nepahetseng, ho beha maemo ka potlako ho netefatsa hore moea oa mosebelisi ha o khutle.
Valve ea ho laola mocheso:Motsoako oa taolo ea mocheso oa mocheso oa phallo: Sehlopha se na le valve ea taolo ea mocheso oa phallo e tsoakiloeng ho etsa bonnete ba hore yuniti e loketse ho qala sebakeng se tlase sa mocheso, le ho netefatsa hore yuniti e maemong a ts'ebetso e ntle ka ho laola mocheso oa phepelo ea oli. ya pheletso ya moya
Mocheso o phahameng oa sehatsetsi se omisang moea
Reverse reflux mokhoa oa ho fapanyetsana mocheso o amohetsoe, o bolokang matla le o tsitsitseng ho feta mokhoa o tloaelehileng oa phallo ea pele;
Mefuta e kaholimo ho li-bar tse 13 e sebelisa li-exchangers tsa mocheso tse sebetsang hantle le tse phahameng tse hanyetsanang le mafome a tšepe.
Matla a karohano ea metsi a moea a fihla ho feta 99%;
Khatello ea phoka e ka ba tlase ho 3 ℃
Mocheso oa moea o kenang o ka ba holimo ho 80 ℃
Lisefe
Sefate sa mofuta oa piston se tiisitsoe ka ntlo ho thibela moea o sa sefshoang hore o se ke oa feta sefefo;
Mochine o mocha oa li-fiber medium o na le sebaka se seholo se sebetsang hantle, o ntlafatsa sekhahla sa ho hloekisa, o na le sebaka se seholo se bulehileng, 'me o fokotsa ho theoha ha khatello.
Mokotla o koetsoeng oa lekoeba o koetsoeng ka filimi o hanana le ho bola ha oli le asiti mme o thibela mokelikeli o kopanyang ho tsoakana hape moeeng.
Mefuta e ka holimo ho 13bar e nang le pontšo e fapaneng ea khatello;
Valve ea ho hula ka boiketsetso
Motlakase oa elektronike o tsitsitseng o tsitsitse ho feta floating ball automatic drain valve 'me ha ho bonolo ho thibela (ball floating automatic drain valve e bonolo haholo ho thibela ka lebaka la bothata ba lesoba la drain)
Hobaneng u Khetha All-in-one Type Air Compressor?
GATD series screw compressor e nang le tanka e kenyelletsa screw compressor, tanka ea polokelo ea moea le likarolo tse ling ho e le 'ngoe
• Ka mor'a hore moea o kopane le tsamaiso, o ka finyella litlhoko tsa ts'ebetso ea likhoebo tse sa tšoaneng
• Ho boloka sebaka, tsamaiso ea moea e hatelletsoeng
• Sistimi e felletseng, ha ho tanka ea moea e eketsehileng, ha ho litšenyehelo tsa ho kenya liphaephe tse hokelang
• Ho bonolo ho e sebelisa, e tenyetseha ebile e bobebe, basebelisi ba ka sebelisa moea o hatelitsoeng oa boleng bo holimo ka mor'a ho hokela phepelong ea motlakase.
• Intelligent control system, imported Siemens Electric e hlile e hlokomela ts'ebetso e bohlale
• E ka kenngoa mocheng o tšehetsang tlhahiso ea modularly ho ntlafatsa botšepehi ba tsamaiso ea tlhahiso
• Mochini o kopanyang ke khetho e nepahetseng bakeng sa libaka tse batlang li khutsitse joalo ka lithupelo tse nyane tsa ho lokisa, lilaboratori, le mabenkele a likoloi a 4S.
• Ponahalo e ntle, ts'ebetso e tšepahalang, moruo o phahameng, o romelloang mose ho maoatle
LITŠOANTŠISO TSA LITŠOANTŠISO TSA MOEA OA TSOHLE KA MONG O MONG
| MOHLALA | KEKETSO MOSEBETSI | HO FIHLELA MOEA MAHALA* EA UNIT KA KHATELLO EA HO SEBETSA | MOTSAMAI | TANKI | LETSATSI LA LERA** | MOEA OUTLET TŠEBELETSO | THOKO | LIEKETSENG | |||
| Sebaka | PSI | m3/min | CFM | kW | HP | L |
| KG | LXWXH | ||
| GATD-7.5 | 8 | 116 | 0.95 | 34 | 5.5 | 7.5 | 180 | 62±2 | G3/4 | 310 | 1050*700*1480 |
| 10 | 145 | 0.85 | 30 | ||||||||
| GATD-10 | 8 | 116 | 1.10 | 39 | 7.5 | 10 | 180 | 64±2 | G3/4 | 320 | 1500*700*1480 |
| 10 | 145 | 0.95 | 34 | ||||||||
| GATD-15 | 8 | 116 | 1.50 | 54 | 11 | 15 | 350 | 66±2 | G3/4 | 415 | 1600*780*1600 |
| 10 | 145 | 1.30 | 46 | ||||||||
| 16 | 232 | 0.85 | 30 | ||||||||
| GATD-20 | 8 | 116 | 2.30 | 82 | 15 | 20 | 350 | 66±2 | G3/4 | 415 | 1600*780*1600 |
| 10 | 145 | 2.10 | 75 | ||||||||
| 16 | 232 | 1.35 | 48 | ||||||||
| GATD-30 | 8 | 116 | 3.60 | 118 | 22 | 30 | 500 | 66±2 | G1 | 450 | 1600*780*1700 |
| 10 | 145 | 3.20 | 114 | ||||||||
| 16 | 232 | 1.80 | 64 | ||||||||
